Offered below are several Glock parts I recommend for competitive purposes.  Links are also listed to other areas of the website that contain Glock related merchandise.

Don't forget our Glock sight installation service.  Simply ship me your slide and I'll install your sights, and ship back to you insured for $40.  In most cases, I install the sights and ship out the day after I receive your slide.  You may order the sights via the website and put a note in the order form comments that you're sending us the slide, or ship the slide and contact information and we'll call you for payment details when the sights are installed. 

Look below for the new GTUL Glock magazine disassembly and cleaning kit. 

AGrip - Click here for more information or to order    

Gorilla Grip -  Click here for more information or to order  

TacGrip - Click here for more information or to order

Warren Tactical & Sevigny competition and carry sights -  Click here for more information or to order

Dawson Precision & Dawson/Heinie sights -  Click here for more information or to order

Dawson Precision Ice Magwell for Glocks  -  Click here for more information or to order

S & J Customs - Magwells, Scope Mounts, Compensators, and Oversize Mag Buttons

Look below for:

Backstrap channel insert plugs

Bladetech DOH Holsters

Jager Products guide rods and compensators for 9mm and .40.

Arredondo & Dawson Precision Glock magazine base pad extension kits

Maglock extended mag release and button

ISMI Magazine Springs - replace your old springs and add new life to your mags.

ISMI Captured Guide Rod with 11, 13, 15 or 17 pound ISMI Recoil Spring

Wolff Guide Rod w/ 14# recoil spring - combo used by one of the world's best production shooters

Wolff Competition Spring kit

Lightning Strike Lightened Steel Striker and Titanium Striker and Safety Plunger

Glock OEM Standard & Extended Mag Release and Extended Slide Release.

Mariner Cups for Striker/Spring

Glock 3.5# Connector

Glockmeister Trigger Spring

Reduced Power Striker Spring (I use this spring even with the stock striker)

Tired of struggling to disassemble your Glock mags for cleaning?  The patent pending GTUL system is the answer.  No more gouging, marring, or scarring the floorplate, tube, or metal liner.  Quickly remove dirt, dust, powder residue and grime that may hinder reliability and cause a failure to feed.  Can be used with Generation I, II, and III Glock magazines.   Best when used as a combo but can be purchased separately.  The GTUL allows the magazine to be secured with one hand while force is applied to disengage the locking tabs.  Use the hardened steel punch in the cleaning brush in the other hand to depress the retaining pin (if present), and slide the floor plate off.  Quick, easy, and simple.  GTUL is $11.95, brush is $14.95, or buy the combo for $21.95.  Now available for .45 acp and 10mm magazines.

Glockmeister Backstrap Channel Insert - now production division legal!  This particular BCI is designed with a slant at the front which acts as a mini-magwell surface which makes mag insertion much easier.  Closest thing you can have to a magwell while still having a USPSA production legal gun.  Secondary purpose is to close the open cavity at the bottom of the grip, not allowing debris to enter and reach the trigger assembly and firing pin mechanisms.  For models 17, 17RTF, 18, 19, 19 RTF, 20, 21, 22, 22 RTF, 23, 23 RTF, 24, 25, 31, 32, 34, 35, 37, and 38.  Does not work with the SF model guns.

Blade-Tech Glock 34/35 Dropped and Offset holster - The "offset" feature of this holster allows for a greater degree of outward cant, which positions the grip of your pistol away from the body in a vertical position for more positive indexing. This popular Production division legal holster also features a "drop", which lowers the placement of the pistol for an easier reach, allowing the arm to remain more extended.  These holsters are adjustable for any belt width from 1.25" to 2", and adjustable for three different cants, straight drop, FBI cant, or muzzle forward.  Holster is black stealth kydex and is for right hand shooters.

Jager Products Compensator - designed to shoot with as little dot movement as possible. Precision CNC machined and cut to follow the contour of the slide.  The 9mm comp is threaded 1/2 x 28 tpi for Lone Wolf barrels, and the .40 compensators are threaded 9/16 x 24 tpi.  Available in black only.

Wolff Trigger Group Competition Spring Kit -  contains the correctly calibrated springs to lower pull weight and improve trigger pull quality of your Glock pistol without complicated gunsmithing or permanent alterations.  Installing this kit will not disable or diminish the effectiveness of the factory safety system.  Designed specifically to meet the needs of competitive shooters, this alteration is not recommended for duty pistols.   Includes one each of the following springs: 4lb. reduced power striker spring, reduced power safety block spring, and extra power trigger spring. Fits all models and calibers of Glock pistols.

Wolff Glock Guide Rod -  Full-length, hardened steel guide rods help prevent spring bind and improves cycling. Lets you keep your factory, captive, recoil assembly intact and use Wolff recoil springs. Machined from solid steel, polished, then hardened.  Fits Glock 17/22/24/34/35.  Some of the best production shooters in the world use this rod teamed with a Wolff 14# recoil spring.

Glock OEM Extended Slide Release - fits models 17, 19, 22, 23, 26, 27, 31, 32, 33, 34, 35.  Will not fit 36, 37, or older two pin frames.  Fits all the newer 3 pin small frame Glocks. 

Arredondo Glock +5 Mag Extension Kit - complete with extended basepad, sleeve, extra-power spring, and installation tool.  Increases stock 15 round capacity by 5 rounds and 6 rounds in 9mm.  USPSA limited legal at 140mm.   Fits Glock models 17, 22, 34, and 35.  Note:  these kits will not work with 10 round magazines, or with magazines for compact or subcompact model Glocks.

Dawson Precision Glock Extended Basepad Kit -  Tool-less Design.  Slide opens and closes to remove base pad.  Removes in a second to clean your high cap magazine.  Maintains 140 mm rule for USPSA and increases capacity to the maximum.  Adds 5 rounds to 15 round 40 mags and more to 9 mm mags.  For small frame Glock only. Made from high strength aircraft aluminum.  Comes with extra power mag spring and instructions on how to install. Use only with 9 mm and 40 S&W Glocks.  Available in black only.  Note:  these kits will not work with 10 round magazines, or with magazines for compact or subcompact model Glocks.

Maglock Magazine Release and Button - extended magazine release and button easily replaces stock model for improved reload times.  Includes both the extended magazine release and button.  Checkered button is made of polymer and can be easily reshaped with a file if desired.  Button can be installed with the long side to the front or rear for greater flexibility.  No modification to gun required.  Can be easily interchanged as necessary with stock magazine release.  Fits Glock 17/22/34/35/37 and all small frame 9/40 models.  Now available for the Glock 20/21/29/30.

 

ISMI Captured Guide Rod - ISMI steel guide rods are compatible with ISMI springs which have the smaller inside diameter. Replaces the stock plastic guide rod for increased longevity and smoother cycling. This part can be used as either a captured or uncaptured unit.  Be aware that replacing the stock plastic guide rod makes a Glock illegal for IDPA SSP division.   Click here to learn how to replace the stock spring on the stock guide rod assembly with a lighter weight spring so the gun remains SSP legal.  Three models are available for the Glock model 17, 19, and 20 pistol family. 

Lightning Strike Glock Striker - reduces lock time and improves accuracy.   Another major benefit in my opinion is how the part improves the feel of the action and trigger break.  Available in the lightened steel ($68) or titanium model ($100).  Includes the proper reduced power striker spring.  Small frame model fits all 9mm and .40 Glock models, and large frame model fits 10mm and .45 models.   

Lightning Strike Titanium Safety Plunger is extremely lightweight and assists in a smoother, lighter trigger pull.   Includes safety plunger spring.  Select desired model below.   Small frame plunger is $21.99 and large frame plunger is $23.99.

Replace the stock striker spring cups with the maritime spring cups to improve the action break and trigger pull on Glock pistols. The improvement is achieved due to the design of the maritime cups which reduces friction due to less surface area contact during the striker stroke.  Fits all Glock models.

Glock OEM Connector - these are factory Glock OEM connectors in both 3.5# and 5# models.  Price is $15 for the 5# model and $25 for the 3.5# model.   

Glockmeister Trigger Spring - this is the Glockmeister trigger spring which reduces the take-up on your Glock.  Simply replace the stock trigger spring to improve your Glock action.