Invictus Practical Holster Hanger
  • Invictus Practical Holster Hanger

Invictus Practical Holster Hanger

$35.50
Title
Quantity
Product available with different options


The Invictus Practical Holster Hanger is a revolutionary new platform which allows you to control the amount of both drop and offset between your pistol's holster body and belt attachment - optimized for your unique draw style, ergonomics and competition requirements.

Laser-cut from 6061-T6 aluminum and hard-anodized - just like all IP AARM/S shotshell caddies - the Holster Hanger provides the ultimate in rigidity and stability for your pistol presentations and performance. All 18-8 Stainless hardware integrates the Holster Hanger into your current loadout, and allows for unprecedented interoperability between holster bodies and belt clips of all makes and kinds (including most Blade-Tech, Safariland, Comp-Tac, Blackhawk, and G-Code holster bodies; and virtually any Blade-Tech or Safariland belt attachment).

Available as a complete kit for $35.50, or just the hanger module for $29.50. These are the long version hangers which are 5 7/8" long.

Here's the difference between the complete kit and the hanger module:

The “Complete Kits” include a second set of hardware consisting of [3] 3/4” 18-8 stainless binding posts, [6] 1/4” nylon spacers, and [3] neoprene rubber washers. This allows shooters running Blade-Tech or Comp-Tac holster bodies to add either 1/4” or 1/2” of additional lateral offset away from the Holster Hanger plate, if so desired.

The “Modules” omit this hardware set and require the user to mount the holster body directly to the Holster Hanger plate using the holster body’s factory-supplied hardware. The “Modules” are also better suited for holster bodies with molded-in binding posts (like Safariland or BlackHawk, among others) which cannot be removed, which renders the additional “Kit” hardware useless anyway.


Complete Kit - approx. 6" long x 2" wide

6061-T6 hard-anodized aluminum
18-8 Stainless hardware
Drops most holster bodies between approx. 2.25" - 3.5" from belt attachment
Integral offset of approx. 0.5" - 0.75" (depending on holster position)
Includes Mod_HP-x Holster Hanger Extended Offset Kit - not recommended
for holster bodies with integral studs (i.e. Safariland, Blackhawk, etc.)

Hanger Module - approx. 6" long x 2" wide

6061-T6 hard-anodized aluminum
18-8 Stainless hardware
Drops most holster bodies between approx. 2.25" - 3.5" from belt attachment
Integral offset of approx. 0.5" - 0.75" (depending on holster position)
Compatible with holster bodies with integral studs, (i.e. Safariland, Blackhawk,
etc.) or use your own holster's removable binding posts.

068-017
0 Items
New product

You might also like